Mitech MH310 Leeb Hardness Tester with intergrated printer on site
different from ultrasonic hardness tester
Advantages
Wide measuring range. Based on the principle of Leeb hardness
testing theory. It can measure the Leeb hardness of all metallic
materials.
Large screen LCD, showing all functions and parameters. With EL
background light.
Seven impact devices are available for special application.
Automatically identify the type of impact devices.
Test at any angle, even upside down.
Direct display of hardness scales HRB, HRC, HRA, HV, HB, HS, HL.
Large memory could store 100 groups (Relative to average times 32～1
) information including single measured value, mean value, impact
direction, impact times, material and hardness scale etc.
Battery information showing the rest capacity of the battery and
the charge status.
User calibration function.
Software to connect to PC via USB port.
Thermal printer integrated, convenient for in field printing.
NI-MH rechargeable battery as the power source. Charge circuit
integrated inside the instrument. Continuous working period of no
less than 150 hours (EL off and no printing).
Auto power off to save energy.
Application
Parts of the Main body
1 Socket of impact device 2 Socket of USB 3 LOGO
4 Paper compartment cover 5 LCD display 6 Keypad
7 Battery switch 8 Power jack 9 Serial Number
10 Product label 11 Battery compartment cover
Instrument Preparation and Inspection
Verification of the instrument is by using standard test block. The
error and repeatability of displayed value should be within the
regulation of Appendix table 2. The instrument and impact device
must be calibrated using a standard hardness block before use as
the first time, or having not been used for a long time, or having
reset the instrument system.
