Mitech WEW-G series microcomputer screen display hydraulic universal testing machine Mechanical Testing Machine

Overview/Appilications

Mitech MEW-G microcomputer screen series steel wire tensile testing machine,by controlling the high-pressure pump to drive the screw movement,mainly for the prestressed steel strand tensile strength test and analysis.It is characterized by high precision gap sealing cylinder, microcomputer display technology, digitized processing and high precision data acquisition and control technology. Its performance is stable, powerful, accurate data processing, strong structure, simple structure, high reliability, simple operation and friendly interface.Widely used in metal and non-metallic processing industry, quality inspection departments quality testing, scientific research and other areas of higher education institutions.It is the necessary professional precision testing equipment for improving production efficiency and saving production costs.

Technical parameters

Maintenance and care

• Test machine is a large precision instruments, should pay attention to water, moisture. Exposed workstations, upper and lower beam parts and attached parts should be coated with anti-rust oil to prevent rust;
• If idle for a long time,turn on and move the upper and lower beams, so that beam position, silk mother often active to prevent rust at least once a week
• Long term frequent use may cause oil decreasing or deteriorating,the amount of oil should be checked every 1~3 months in accordance with the use,if the oil surface is lower than the oil window you need to add the same kind of hydraulic oil to the middle of the window;if the oil has deteriorated, then remove the special oil source after the lower part of the oil nozzle to release and replace the hydraulic oil;
• Frequent use of this equipment for tensile failure test may cause some of the fasteners loose. The following parts should always be checked for tightening:

①There are two pieces (8 blocks) in front and back of the upper crossbeam and the moving beam. The L type press plate (with the jaw board) is used to fix each pressing plate with 3 screws;

②6 screws at each end of the moving beam;

③The drive chain shall be checked every 6 months, and the position of the tension wheel shall be adjusted accordingly;

• The following areas are lubricated every 3~6 months, depending on the environmental conditions and frequency of use:

①The combination of the screw and the frame is lubricated with grease No. 100 (removing the lower part of the main body panel);

②The screw drive chain is lubricated with grease (removing the lower part of the main panel);

③The screw threads are kept clean and lubricated with butter or molybdenum disulfide;

• Each of the upper cross beam and the moving crossbeam is provided with 2 jaws, and the clamping plate of the jaw is an important part of the machine,the sundries on the contact surface of the jaw plate and the cross member shall be removed frequently,remove the pliers on the side of the moving beam, remove the jaws,clean the contact surfaces of the jaw, pallet and crossbeam with oil cloth, and apply the proper amount of grease and graphite to the fastening plate;
• Do not start the test to prohibit the click "start test" button, or easy to cause accidents;
• When entering the program, if the abnormal prompt or the default test force value is different from the past, do not test, exclude the trouble refer to the troubleshooting;
• If the program does not exit the test state after the test is broken, click [Stop] to exit the test state immediately;
• After completing the test exit procedure,shut down the pump which the cylinder must fall to the end to ;
• The software has overload protection function, when more than 0.2% of full scale will have a protective prompt, please press OK and stop the experiment;
• Don’t disassemble the instrument without authorization, maintenance related matters please contact MITECH after-sale service department with 4000600280.

Mitech CO.,LTD. located in Beijing, China and was founded in 2004 by a group of doctors and masters graduated from tsinghua or Peking University. It is a professional NDT testing manufacturer, we have our own R&D office for newest and highest technology.

Over ten years, Mitech has always adhered to the business philosophy,

"Technology innovation for development, high quality service as the forward boat", relying on the mastered technology and the tireless pursuit for science and technology, Mitech continuously blends in leading-edge technology to NDT instrument R&D and application, makes the product performance and technical indicators reaching to the international leading level.

From NDT portable instrument to large automatic detection system. Mitech owns intellectual property rights of core technology and it has already applied for invention patents and software copyrights and passed international certification such as EU CE certification and Russian GOST certification etc. Mitech products has been widely used in quality control and safety monitoring of aerospace, petrochemical pipeline, military industry, nuclear industry, ship, automobile, metallurgy, steel structure manufacture, boiler pressure vessel and so on, do the best working for safe operation of industrial production.

Mitech users have spread all over the world such as Japan, Korea, India, Germany, USA etc. By the best quality with competitive price, Mitech had gained a good reputation from global customers. As the professional NDT manufacturer, Mitech will insist our rule of serving for world NDT industry for best and quick development. We are looking for NDT agents from all over the world and welcome knowledgeable people to join us for development.

As professional NDT manufacturer, Mitech will supply you best quality products with competitive price. Professional business team can provide more promotion support according to local market together with our comprehensive experience to help you do professional needs analysis and market protection, launch new products continuously to create more opportunities for long cooperation. Meanwhile, we will support you strong after-sale service to solve more trouble. Any product quality problem within 3 months, we will replace a new one for free, all products with warranty up to two years and life-long maintenance. We will provide maintenance training and accessories with cost price. Mitech has sound market management system to help you manage market precisely and share customer information, establish and standardize market system for long-time win-win cooperation.

Mitech devotes to creating the value for world NDT industry as own duty, unswerving to provide perfect products to the market, providing customers with conscientious service, sincere management to create famous brand.

Mitech is willing to cooperate with world NDT colleagues and makes the efforts for more brilliant tomorrow, struggling for more secure NDT world.